BHA Zirconia Curved Edge Fillet Weld Quick Change Flap Discs, 2 Inch - 10 Pack (40 Grit)

2" Quick Change (Type R) Zirconia Curved Edge Flap Discs by Black Hawk Abrasives combines the durability and consistency of a flap disc, the quick change convenience of a rolock, a compact size for ease of use in tight areas, and curved edge flaps for versatility of flat or corner grinding without changing your tool. Each curved edge quick change flap disc is made with premium self-sharpening, zirconia abrasive grains, resin on resin bonded atop an X weight poly/cotton cloth. This material is this cut into strips and layered on top of one another in a partially overlapping pattern and adhered to a threaded male, plastic roll-on attachment for rapid fastening (Equivalent to 3M Roloc fastening system). Finally, the edge of each flap is curled, providing these BHA flap discs with their signature fillet weld flap disc shape. This construction allows for consistent cutting action and extremely long useful life because as flaps are worn away, new fresh abrasive grains are exposed to keep on cutting. The curved edge is designed specifically for fillet welds and thus allows you to grind using the side and the bottom of the flap disc, not skipping a beat when going from stock removal to edge chamfering to sanding weld seams or slag regardless of location in tough right angles. These 2” radial flap discs are designed to be used on an angle grinder and are particularly effective at grinding steel, stainless steel, cast iron, titanium, nickel and other ferrous metals. Available in 40, 60, 80, and 120 grit.

• 2" Diameter
• Made with premium Zirconia Grains that are resin over resin bonded onto extra strong polyester / cotton flap material
• Curved grinding edge for fillet welds or other hard-to-reach areas
• Contaminant Free: Less than 0.1% Iron, Sulfur and Chlorine - will NOT cause after-rust
• Type R - Male roll on quick change attachment